Screening Equipment Commonly Used in Electroplating Wastewater Treatment

The treatment of electroplating wastewater cannot be separated from screening and filtering equipment. The screening and filtering equipment commonly used for electroplating wastewater treatment can be divided into three categories based on specific purposes: grid machines, screen mesh, and filtering equipment. Below, Jiangsu Haipu Functional Materials Company, a manufacturer of electroplating wastewater treatment, summarizes and introduces the commonly used screening and filtering equipment in electroplating wastewater treatment as follows:

Grille machines and screens have been widely used in the pretreatment of electroplating wastewater. Whether it is industrial wastewater or domestic wastewater, before lifting the pump and main structure, it is necessary to set up facilities such as grilles to intercept larger debris, or set up screens to intercept finer suspended solids. According to the shape of the grille, the grille machine can be divided into two types: flat grille and curved grille. According to the method of slag cleaning, it can be divided into two types: manual slag cleaning and mechanical slag cleaning. Currently, mechanical slag cleaning is basically used. The efficiency of screening equipment depends on the spacing between the grids, among which the spacing between the grids is between 50-100mm, which is called coarse grid; The spacing between 10-40mm is called the central grille; Less than 10mm is called a fine grid.

The screening and filtering facilities are constantly being improved in application, and are now not only used for electroplating wastewater treatment and material recovery and concentration, but also applied to the deep treatment of other types of wastewater.

For more information on electroplating wastewater, please continue to follow the official website of Jiangsu Haipu Functional Materials Co., Ltd., a manufacturer of electroplating wastewater treatment.